|
|
|
|
THIS PRODUCT HAS BEEN DISCONTINUED, THIS PAGE IS UP FOR INFORMATIONAL PURPOSES ONLY
A wood burning insert warms up any room in your house. This wood burning insert from Flame is ideal if you want to increase the efficiency of the fireplace in your house. It is designed to be installed in an existing wood burning fireplace. Open burning fireplaces are very inefficient as they burn rapidly, put off little heat into your living area, and pull large volumes of air out of the home and up the chimney with most of the heat from the fireplace. The Flame insert provides an air-tight, efficient combustion with long burn times using little wood. The firebox is 2.3 cubic feet and can hold logs up to 20 inches long. This allows the insert to output up to 75,000 BTUs and effectively heat up to 2,100 square feet of space. A heat activated 130 cfm fan kit is included, but a Faceplate and Faceplate Trim Kit are required to complete the appliance. A 6" stainless steel chimney liner kit is also recommended for safety and optimum operational performance. Inserts installed in fireplaces on exterior walls with exposed chimneys should also consider installing a Draw Collar to avoid draft problems.
Technical specsType of fuel | Wood | Recommended surface | 500 to 2,100 sq. ft. | Blower | 130 CFM | Maximum output - EPA test wood | 32,200 BTU | Maximum output - seasoned cord wood | 75,000 BTU | Color | Metallic black | Minimum fireplace opening | 28 7/8"W x 15 5/8"D x 23 3/8"H | Exterior dimensions | 28 3/8"W x 26 3/8"D x 23 1/8"H | Exhaust pipe diameter | 6" | Centre line of flue outlet to the back | 6 7/8" | Centre line of flue outlet to the side | 13 1/2" | Type of chimney | 2,100 deg. F (1,150 deg. C) | Recommended chimney diameter | 6" | Minimum chimney height | 12' | Firebox dimensions | 21"W x 16 1/2"D | Log positioning | Width | Maximum log length | 20" | Door opening dimensions | 17 1/2"W x 9"H | Type of door | Glass with cast iron frame | Minimum clearances to combustibles * (Data expressed in inches. 1 inch = 25.4 mm) Combustible side wall to unit | 16" | Combustible side mantle to unit | 12" | Combustible top mantle to unit | 20" | Combustible top shelf to unit | 22" | Minimum floor protection in front of unit | 18" / 16" | Projection in the room minimum / maximum | 8 3/4" / 10 3/4" | * The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogs, flyers, magazines and/or web sites).
|
| Glass surface | 15 7/8"W x 9"H | Steel thickness | 5/16" | Weight | 398 lb | Warranty | Limited lifetime | Test standard - safety | ULC 628, UL 1482, UL 737 | Test standard - emissions | E.P.A. Method 28 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Model Number: FL-061W
- Maximum heat output of 75,000 BTU
- Includes a heat-activated, 120 CFM blower
- 2.1 cubic foot firebox
- Maximum log length of 20 inches
- Air-wash system
- Optimum efficiency : 77.2%
- May qualify for some government incentives.
- Tested by Intertek as per applicable standards (CSA/UL/ULC and/or others)
Options
- Faceplate kit (29" x 44") (AC03410)
- Faceplate kit (32" x 50") (AC03411)
- Black (OA10122), brass (OA10121) or brushed nickel (OA10123) finish faceplate trim kit (29" x 44")
- Black (OA10128), brass (OA10127) or brushed nickel (OA10129) finish faceplate trim kit (32" x 50")
- Heat shield for surround / shelf (AC01317)
- Fire screen (AC01315)
- Fresh air kit adapter (5" diameter) (AC01298)
- Liner fastening system (AC02006)
- Liner offset adaptor (AC01370)
|
|
|
|
|
|
|