 |
 |
 |
|
THIS PRODUCT HAS BEEN DISCONTINUED, THIS PAGE IS UP FOR INFORMATIONAL PURPOSES ONLY
A wood burning insert warms up any room in your house. This wood burning insert from Flame is ideal if you want to increase the efficiency of the fireplace in your house. It is designed to be installed in an existing wood burning fireplace. Open burning fireplaces are very inefficient as they burn rapidly, put off little heat into your living area, and pull large volumes of air out of the home and up the chimney with most of the heat from the fireplace. The Flame insert provides an air-tight, efficient combustion with long burn times using little wood. The firebox is 1.8 cubic feet and can hold logs up to 19 inches long. This allows the insert to output up to 60,000 BTUs and effectively heat up to 1,600 square feet of space. A heat activated 130 cfm fan kit is included, but a Faceplate and Faceplate Trim Kit are required to complete the appliance. A 6" stainless steel chimney liner kit is also recommended for safety and optimum operational performance. Inserts installed in fireplaces on exterior walls with exposed chimneys should also consider installing a Draw Collar to avoid draft problems.
Technical specs
|
Type of fuel
|
Wood
|
|
Recommended surface
|
850 to 1600 sq. ft.
|
|
Blower
|
130 CFM
|
|
Maximum output - EPA test wood
|
34000 BTU
|
|
Maximum output - seasoned cord wood
|
60000 BTU
|
|
Color
|
Metallic black
|
|
Minimum fireplace opening
|
28 7/8"W x 13 1/8"D x 21 1/4"H
|
|
Exterior dimensions
|
27"W x 23 1/2"D x 20"H
|
|
Exhaust pipe diameter
|
6"
|
|
Centre line of flue outlet to the back
|
6 7/8"
|
|
Centre line of flue outlet to the side
|
13 7/16"
|
|
Type of chimney
|
2,100 deg. F (1150 deg. C)
|
|
Recommended chimney diameter
|
6"
|
|
Minimum chimney height
|
12'
|
|
Firebox dimensions
|
21 1/4"W x 14"D
|
|
Log positioning
|
Width
|
|
Maximum log length
|
19"
|
|
Door opening dimensions
|
17 3/4"W x 8 1/4"H
|
|
Type of door
|
Glass with cast iron frame
|
|
Minimum clearances to combustibles *
(Data expressed in inches. 1 inch = 25.4 mm)
|
Combustible side wall to unit
|
13"
|
|
Combustible side mantle to unit
|
10"
|
|
Combustible top mantle to unit
|
22"
|
|
Combustible top shelf to unit
|
29"
|
|
Minimum floor protection in front of unit
|
18" / 16"
|
|
Projection in the room minimum / maximum
|
7.75" / 9.75"
|
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
|
|
|
Glass surface
|
16"W x 7.75"H
|
|
Steel thickness
|
ΒΌ"
|
|
Weight
|
350 lbs
|
|
Warranty
|
Limited lifetime
|
|
Test standard - safety
|
ULC-628 , UL 1482
|
|
Test standard - emissions
|
E.P.A. Method 28
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Model Number: FL-060
- Maximum heat output of 60,000 BTU
- Includes a heat-activated, 130CFM blower
- 1.8 cubic foot firebox
- Maximum log length of 19 inches
- Air-wash system
- Optimum efficiency : 75%
- May qualify for some government incentives
- Tested by Intertek as per applicable standards (CSA/UL/ULC and/or others)
Options
- Faceplate kit(29" X 44") (AC03400)
- Black (OA10122), brass (OA10121) or brushed nickel (OA10123) finish faceplate trim kit (29" x 44")
- Fresh air kit adapter (5" diameter) (AC01298)
- Liner fastening system (AC02006)
- Liner offset adaptor (AC01370)
|
|
|
|
|
|
|
Flame energy XTD 1.5 I 
